Frequently Asked Questions
Answers to the questions we are asked most often about underwater windows, glass walls, glass bottoms and round windows, for pools and ships.
All Questions
Your question is not answered here? Send it to us and we will be glad to answer it.
Ask Your QuestionIs an underwater window made of glass or acrylic?
Hydrosight windows are made of cast acrylic (PMMA GS according to DIN EN ISO 7823-1). Even in thick panels it lets through about 92 % of the light, without the green tint of thick laminated glass, and it absorbs UV completely. It weighs less than half as much as glass, insulates better against condensation and deforms under overload instead of breaking suddenly. See the comparison of glass and acrylic.
How thick is the acrylic of an underwater window?
There is no standard thickness. It is calculated for each window from its size and the water depth, typically between 30 and 200 mm.
How large and how deep can an underwater window be?
Up to 11 × 3 m (36 × 10 ft). Size and depth depend on each other: large panels are made for the water depth of a normal pool, while small windows can be designed for 20 m of water column or more. Every window is calculated for its own size and depth.
Can I add an underwater window to an existing pool?
Yes, in many cases, if the outside of the pool wall is accessible: the pool stands above ground, or a room such as a basement or garage is directly adjacent to the pool wall. An opening is cut into the wall and the frame is connected to the pool's waterproofing. Please send us the wall build-up so we can check it.
Who installs an underwater window?
Your pool builder or a local contractor can fit it using our installation instructions. Or our own installation team does it for you: it works on construction sites around the world all year round. The options are described on the page Installation.
How long does it take to make an underwater window?
Manufacturing takes 3 to 4 months after you approve the drawings, depending on the workload in our production; in urgent cases it can be faster. In a new build, the opening has to be planned with the pool shell, so contact us early. See planning and installation.
Is there a warranty?
Yes, a 5-year manufacturer's warranty in addition to the statutory warranty. See the warranty terms.
How do I get a price?
Enter your dimensions in the configurator at the end of this page. You will then receive a drawing and a quote from us.
Can I add a glass wall to an existing pool?
Yes. This requires concrete work: an opening is cut into the existing pool wall, and the window is installed in it.
Can I build a pool with a glass wall myself?
Yes. The glass wall arrives as a ready-to-install kit with all fixings, seals and step-by-step instructions, and the acrylic never has to be bonded or sealed on site. Your pool builder or contractor can install it using our instructions, or our own installation team does it for you. The options are described on the page Installation.
How long can a glass wall be?
A single acrylic panel can be up to 11 m long. Longer walls have posts (mullions) between the panels, or two or more panels are butt-bonded into one continuous wall.
How do I clean the acrylic?
Use a soft microfiber cloth moistened with water, and mild cleaning agents for greasy dirt. Never rub the acrylic dry: it becomes statically charged, attracts dust and gets scratched. Never use cleaners containing alcohol, benzene or organic solvents such as acetone, including standard glass cleaners: they attack the acrylic and can cause stress cracks (crazing). Only use pool robots that the manufacturer has approved for acrylic. Details are in the Operation and Maintenance Manual.
What if the acrylic gets scratched?
Light surface scratches can often be polished out with a suitable polishing paste. For deep scratches, please contact us.
Do you deliver to my country?
Yes. We ship worldwide, and our own installation team works on construction sites around the world all year round, together with a few long-standing partners. Check where we have worked already.
What does a glass wall cost?
Prices range from around €10,000 to more than €100,000 (ex works, excluding VAT), individually calculated for your project. Typical prices are on our cost page. For a quote, enter your dimensions in the configurator at the end of this page. We usually respond within one working day.
Does a pool with a glass bottom need to be on a roof?
No. It needs a room or an open space below the pool, for example a basement, a hall or a passage.
Can people walk on a glass pool floor?
Yes. The window is designed for the water and for the people standing on it, and it can be part of the walkable pool floor. To protect the surface, please do not walk on it with shoes.
Can a glass pool floor leak into the room below?
The window is a sealed unit: the panel is bonded into the frame at the factory, and every unit is pressure and leak tested before delivery. The connection to the pool waterproofing is made on site through the frame.
Glass or acrylic for a glass bottom pool?
Our windows in the pool floor are usually made of cast acrylic, for three reasons:
- Condensation: The window has warm pool water above it and a cooler room below. If the panel insulates poorly, condensation forms on the underside and can drip onto furniture. Acrylic conducts heat much less than glass (0.19 W/(m·K)), so the underside stays closer to room temperature and less condensation forms.
- Glazing overhead: The water and the panel sit above a living space. Acrylic is ductile: under heavy loads or an impact, for example a heavy object dropped into the empty pool, it deforms instead of breaking suddenly.
- Light: Thick laminated glass can take on a green tint and lose light. Acrylic keeps its 92% light transmission, so the room below stays bright.
More in the comparison of glass and acrylic.
What should I consider when draining a pool with windows?
Cover the windows right away, for example with the white 3 mm protective plates that come with every window. Direct sunlight on a dry acrylic window can overheat it and cause thermal expansion. The Operation and Maintenance Manual has the details.
What sizes do round underwater windows come in?
Round windows are available from 20 cm to 300 cm in diameter.
How deep can a round underwater window be installed?
The standard design is good for up to 20 m of water column. The possible depth depends on the diameter, and higher pressures are possible on request.
Do you also supply cabin windows, hatches or windscreens?
No. We only make windows that carry water pressure: hull windows below or close to the waterline, windows in glass-bottom boats and semi-submarines, and glazing for pools on board. For cabin windows, hatches and windscreens above the waterline, please contact a marine glazier.
Which classification societies do you work with?
On request, we supply windows with a DNV certificate (formerly Germanischer Lloyd, GL). Windows close to the waterline are designed according to the rules of the classification society of the vessel, for example ABS or DNV; please tell us which rules apply to your project.
Why acrylic and not glass below the waterline?
Acrylic deforms under overload instead of breaking suddenly, so it absorbs wave impact without brittle fracture; this is why it has been used for decades for submarine viewports and the windows of semi-submarines. It weighs less than half as much as glass and can be cast thick and formed into curved panels. Its drawback is the surface: it scratches more easily, so windows in the superstructure, on the bridge or in the salon are usually made of glass. See the comparison of glass and acrylic.
What does a classification society require for a pool on board?
The glazing of a pool on a ship is a safety-relevant structural element. Depending on the vessel, the rules of the classification society apply, for example DNV-RU-UWT for underwater windows. We provide the calculation (FEA), drawings and material certificates for approval; the certificate itself is issued for each project by the classification society.
Can acrylic withstand tropical heat on deck?
Yes, if the design takes it into account. Acrylic expands about four times as much as stainless steel and softens at high temperatures, so we design for a temperature range of −15 °C to +45 °C, use flexible bedding and light-colored joints, and limit the long-term stress in the acrylic.
How thick is the acrylic of a ship's underwater window?
There is no standard thickness. It is calculated for each window from its size, the water pressure and the wave loads at its position in the hull.
Can an existing ship be fitted with underwater windows?
Often, yes, for example when an excursion vessel or a fishing boat is converted. The opening and the frame have to be integrated into the hull structure by a shipyard. Send us the hull drawing and the planned window positions, and we will check what is possible.
How long does it take to make a ship's underwater window?
Manufacturing takes 3 to 4 months after you approve the drawings, depending on the workload in our production; in urgent cases it can be faster. Please contact us early in the design of the vessel.
What does an underwater window for a ship cost?
Marine windows are made individually for each vessel, so there is no list price. The price depends on the size and number of windows, the shape, the water pressure, the frame and the required certificates. Send us your drawings through the contact form, and you will receive a quote.
How do I care for acrylic windows on board?
Clean them with a soft, damp microfiber cloth and mild cleaning agents; never use alcohol-based glass cleaners or solvents. Scratches in acrylic can be polished out. Details are in the operation and maintenance manual.
Is the window resistant to chlorine and salt water?
Yes. The complete system – acrylic, stainless steel frame (1.4571 / AISI 316Ti) and seals – is resistant to free chlorine up to 0.6 mg/l (standard according to DIN 19643) and to shock chlorination up to 100 mg/l for a maximum of 2.5 hours. The standard version is seawater resistant (salinity about 3.5 %). Versions for brine and for drinking water according to the KTW guideline of the German Environment Agency (UBA) and DVGW W 270 are available on request.
How is the window connected to the pool waterproofing?
Through the stainless steel frame, which is made for the pool type at the factory:
- Tiled and concrete pools: adhesive flange, bonded to the waterproofing (sealing slurry or reactive sealant).
- Liner and plastic pools (PVC/PP): loose and fixed flange that clamps the liner with an EPDM seal.
- Stainless steel pools: welding flange, welded directly into the pool wall.
- Exposed concrete pools: water stop plate, cast into the concrete.
Details are on the page Underwater Windows for Pool Types.
Can condensation form on the room side of the window?
Rarely. Acrylic insulates much better than glass (thermal conductivity 0.19 W/(m·K)), so the surface on the room side stays close to the room temperature. Condensation can still form when humid room air meets a window surface below the dew point, for example when cold pool water borders a warm, humid room. Good ventilation or dehumidification of the room prevents it.
Can you make curved panels, panoramic windows or tunnels?
Yes. Single acrylic panels are made up to 11 × 3 m (36 × 10 ft) in one piece. Larger panoramic windows, for example for public aquariums, are made of several panels bonded together with nearly invisible joints. Acrylic can also be thermoformed into curved panels, cylinders and walk-through tunnels.
Do you also supply loose acrylic panels or blocks?
No. Hydrosight supplies complete windows: the acrylic is bonded and sealed into a stainless steel frame at the factory and pressure tested, so the window arrives ready to install in pools, aquariums, ships and test tanks. This way the critical seal between acrylic and frame is never made on the construction site. Frameless panels for public aquariums are the exception: they are sealed into the concrete tank by our own installation team. More on factory-glazed vs. field-assembled windows.